Drive
Gearless
Gearless motor for lower noise and energy use, or a quiet geared machine when the building has a machine room.
Lifts, goods lifts and escalators for export
Complete lifts, made to measure in France and Europe, packed and shipped with the documents your bank and forwarder need.
Our lift ranges
The Sodimas ranges we supply, from the compact residential lift to the 5-tonne goods lift.
Médium 2.5 range
A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
See the range →
ALPHA Motion
Two loads, predefined dimensions and simplified installation: Sodimas' standard residential lift, for new and existing buildings.
See the range →
SweetLIFT home lift
A home lift designed in France by Sodimas for houses and villas: it fits without major works, with a 10 cm pit, and can be fully customised.
See the range →
Export onlyHYBRID
Simple, robust mechanics combined with QI Touch electronics: the best-value Sodimas lift for volume projects, with or without a machine room.
See the range →
Mégalift goods lift
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.
See the range →
Car lift
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
See the range →The range
Machine-room-less lift
Gearless motor installed in the shaft: no machine room to build, less noise, lower energy use.
See the product →
Lift with machine room
Quiet, vibration-free geared machine for buildings with a technical room.
See the product →
Goods lifts
For industry, logistics and retail, sized for the load and use.
See the product →
Escalators
For shopping centres, stations and public buildings, designed for the rise and passenger flow.
See the product →Components
Residential Pack: the electrical package, ready to install
The complete electrical package, in stock: for our lifts, for the mechanical equipment of your choice or to modernise an existing lift.
See the product →
Modernise the electrical equipment of an existing lift
Replace the controller, wiring and signalling of a lift in service with a complete Sodimas electrical package, in stock. On request, we also supply a motor matched to the installation.
See the product →Lift controllers and connected lifts
The controller is the heart of the lift: it drives the machine, the doors, the signalling and every safety device. We work with Sodimas and Edel, and their connected solutions.
See the product →
Lift motors and machines
Permanent-magnet gearless motors or geared machines, for new lifts and for replacing an existing machine.
See the product →
Car operating panels and landing buttons
The signalling that dresses your lift, in the car and on every floor, chosen with the Sodimas or Edel electrical equipment.
See the product →Technology
Sodimas technology, a French manufacturer
EUROLIFT relies on Sodimas for the drive, the controller and the safety components. The components of our lifts are designed and manufactured in Europe.
Controller
QI Touch
Multitasking system, CAN bus communication, Quick Install wiring and guided commissioning. Compliant with EN 81-20 and EN 81-50, ready for connected monitoring.
Learn more →
Absolute positioning
LIMAX
A sensor on the car roof and a coded magnetic tape in the shaft: the car position is always known, stops are accurate and the shaft has fewer parts.
Learn more →Components from the Sodimas range
How an export order works
- 01
Study and offer
We review your drawings and send a detailed offer, then a proforma invoice.
- 02
Manufacturing
Lifts are made to measure in France and Europe. We track the release dates.
- 03
Packing
Every crate is listed on a precise packing list, lift by lift.
- 04
Documents
Invoice, certificate of conformity, packing list and bank documents prepared for your bank and forwarder.
- 05
Shipping
Components consolidated in Europe, then shipped from the port best suited to the project, CFR to the port of destination or FCA for your carrier. Export clearance by an approved customs representative.
- 06
Follow-up
We remain your contact until delivery, and afterwards for spare parts.
Documents provided
- Proforma and commercial invoices
- Detailed packing list
- Certificate of conformity
- Documentary collection documents and bill of exchange, depending on payment terms
- Technical description of each lift
Delivery terms
CFR
We arrange sea freight to the port of destination, for example Marseille – Algiers.
FCA
We hand the goods over at our consolidation point in Europe to the carrier appointed by your company.
Frequently asked questions
Where do shipments leave from?
Components come from several European manufacturers. They are consolidated, then shipped from the port best suited to the project, for example Marseille or Barcelona.
Who handles export customs clearance?
Export clearance is handled by an approved customs representative appointed by EUROLIFT.
Do you also supply goods lifts?
Yes, and escalators too. Tell us the use and the load: we will propose the right equipment.
A lift project?
Send us your drawings: we study your project and send you a detailed offer.