Space saving
No ramp to build: the freed area can host parking spaces.
Mégalift car lift
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
- 3,000 kg
- 2,500 × 5,320 mm car
- Electric or hydraulic
- Automatic re-levelling
Based on the Mégalift concept, the Sodimas car lift fits into residential buildings, offices, public car parks and any building where a ramp is not possible. It is designed as everyday equipment, reliable in the building's flow of vehicles in and out.
Key strengths
Electric or hydraulic
Electric traction, 2:1, 3:1 or 4:1 roping for long travel; hydraulic for short travel.
Re-levelling
Automatic re-levelling in both directions while vehicles drive in and out.
Robust
Bolted folded sheet metal and factory pre-assembly, like the whole Mégalift range.
Harsh environments
Suited to the cold, humid or dusty conditions of car parks.
Bespoke
Load, dimensions and finishes adapted to your building.
In pictures
Specifications
| Load | 3,000 kg |
|---|---|
| Speed | 0.5 m/s maximum |
| Car | 2,500 × 5,320 mm (5,420 mm over sills) |
| Car height | 2,000, 2,100 or 2,200 mm |
| Min. shaft width, hydraulic | 3,500 mm with 2,400 CO · 3,550 mm with 2,500 CO |
| Min. shaft width, electric | 3,650 mm with 2,400 CO · 3,700 mm with 2,500 CO |
| Shaft depth | 5,820 mm, doors at landings |
| Pit | 1,400 mm minimum |
| Headroom | Car height + 1,600 mm |
| Drive | Hydraulic or electric, with machine room |
| Re-levelling | Automatic in both directions |
Sodimas manufacturer data. For any other load, speed or dimension, please contact us.
What we need to study your project
Vehicle type, number of floors, travel, frequency of use and the dimensions available for the shaft.
Which buildings
- Residential car parks
- Office buildings
- Public car parks
- Car dealerships and showrooms
- Villas and prestige residences
Our other ranges
Médium 2.5 range
A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
See the range →
ALPHA Motion
Two loads, predefined dimensions and simplified installation: Sodimas' standard residential lift, for new and existing buildings.
See the range →
SweetLIFT home lift
A home lift designed in France by Sodimas for houses and villas: it fits without major works, with a 10 cm pit, and can be fully customised.
See the range →
Export onlyHYBRID
Simple, robust mechanics combined with QI Touch electronics: the best-value Sodimas lift for volume projects, with or without a machine room.
See the range →
Mégalift goods lift
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.
See the range →Frequently asked questions
Does the driver stay in the vehicle?
Yes. The car lift carries the vehicle with its driver and passengers.
What shaft dimensions are needed?
At least 3,500 to 3,700 mm wide depending on drive and clear opening, 5,820 mm deep and a 1,400 mm pit.
Is it available for export?
Yes, in France and internationally.
A lift project?
Send us your drawings: we study your project and send you a detailed offer.