Almost no building work
Only a 100 mm pit and a 2,500 mm top floor: the lift fits without digging or altering the roof.
A home lift designed in France by Sodimas for houses and villas: it fits without major works, with a 10 cm pit, and can be fully customised.

With 50 years of experience, Sodimas designed SweetLIFT for private homes. The lift fits in an aluminium structure or a concrete shaft, inside or outside the house, and connects to a simple single-phase supply. Car, doors, structure and buttons are chosen to match your interior.
Only a 100 mm pit and a 2,500 mm top floor: the lift fits without digging or altering the roof.
Permanent-magnet gearless machine at the top of the shaft and belt drive: smooth rides, accurate stops, silent operation.
Single-phase 230 V, 50 Hz, 16 A supply: no three-phase needed in the house.
Car and automatic doors sized for a wheelchair, in line with accessibility requirements.
In a power cut the car automatically goes to the nearest floor and opens its doors. QI Touch controller, optional Pilote remote monitoring.
Wood laminates, stainless steel, glass, structure colour, ceiling, floor, handrail, doors and buttons: there is no standard car.








| Load | 225 to 400 kg, 3 to 6 persons |
|---|---|
| Speed | 0.15 m/s in the European Union; 0.40 m/s outside the EU; automatic 0.40 m/s when the car is empty |
| Travel | 1.5 to 15 m |
| Pit | 100 mm minimum (500 mm maximum) |
| Top-floor headroom | 2,500 mm minimum |
| Machine | Gearless at the top of the shaft, 1:1 belt of 31 polyurethane-coated steel cords |
| Power and supply | 1.3 kW, single phase 220-230 V (7.6 A max) |
| Doors | Swing (opening 600 to 900 mm), automatic SD20 (700 to 900 mm) or Salon (650 to 900 mm) |
| Access | Single, through or adjacent (90°) |
| Shaft | Sodimas aluminium structure, colour of your choice, or concrete shaft; inside or outside the building |
| Control | QI Touch controller, touch screen in the car, 60 starts per hour |
| Rescue | Automatic return to the nearest floor on UPS |
| Regulation | Machinery Directive 2006/42/EC |
Sodimas manufacturer data. For any other load, speed or dimension, please contact us.
The car can reach 1,100 × 1,400 mm. In a concrete shaft with single access and a swing door, the clear inside space starts at about 1,070 × 1,305 mm. Send us a plan or a few photos of the location: we will propose the right configuration.

The lift controller designed and made in France by Sodimas. It drives the machine, doors, signalling and every safety device, and is the standard controller of the Residential Pack and our lifts.
Learn more →
An absolute sensor on the car roof and a coded magnetic tape along the full height of the shaft: the QI Touch controller always knows the exact position and speed of the car.
Learn more →
A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
See the range →
Two loads, predefined dimensions and simplified installation: Sodimas' standard residential lift, for new and existing buildings.
See the range →
Export onlySimple, robust mechanics combined with QI Touch electronics: the best-value Sodimas lift for volume projects, with or without a machine room.
See the range →
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.
See the range →
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
See the range →Hardly: a 100 mm pit is enough, often the thickness of a screed.
Yes. The aluminium structure can stand outside, glazed or with panels, in the colour of your choice.
Yes. We supply it in France and internationally; outside the European Union the speed can reach 0.40 m/s.
Send us your drawings: we study your project and send you a detailed offer.